
产品分类
Products
更新时间:2026-10-15
浏览次数:19全自动溶出取样系统
DT12C全自动溶出试验仪
DT12C溶出试验仪是一台严格按照《中国药典》和《美国药典》规定全新设计制造的高性能的12杯12杆溶出度试验装置,智能化程度高、结构先进、控制准确、可靠性好。PC杯板与水浴箱一体式设计,外形美观大方,便于多角度观察试验进程。耐高温,耐腐蚀,延长使用寿命。
性能及技术参数。
l 装置数:12杯12杆。(可增配等温式补液杯)。
l 转速分区:(6+6)2个工作区,可同时完成2批溶出试验。
l 投药方式:序列投药、同步投药。
l 智能取样架可根据溶媒体积自动升降,并且具有杯内温度实时监测等功能。
l 适用方法:《中国药典》第一法(篮法)、第二法(桨法)、第三法(小杯法)选配、第四法(桨碟法)选配、第五法(转筒法)选配。
l 搅拌桨与转篮规格符合药典规定。
l 搅拌桨摆动幅度:≤0.3mm
l 搅拌速度:25RPM-250RPM。
l 搅拌方向:顺时针、逆时针。
l 搅拌速度分辨率:0.01RPM。
l 转速:≤0.5%。
l 转篮摆动幅度:≤0.5mm
l 转杆与溶出杯轴偏差:≤0.5mm
l 水浴温度:室温-45.00℃。
l 温度分辨率:0.01℃。
l 水浴控温精度:0.1℃。
l 溶出介质控温精度:0.1℃。
l 投药模式:序列投药、同步投药。
l 升降系统:竹节式方柱升降。
l 权限管理:三等级、七用户。
l 审计追踪:128条×366天。
l 工作噪声:<60db
l 环境条件:环境温度5—37℃,相对湿度≤80%
l 安全性能:符合国家行业标准,具有自检和自动保护功能
l 电源:220V,50Hz
* 增配选配项目需另购。
DT12C Dissolution tester
DT12C dissolution test instrument is a high-performance 12-cup 12-bar dissolution test device designed and manufactured strictly in accordance with the provisions of Chinese Pharmacopoeia and American Pharmacopoeia. It has high intelligence, advanced structure, accurate control and good reliability. PC cup board and water bath box integrated design, beautiful appearance, easy to observe the test process from multiple angles. High temperature resistance, corrosion resistance, extended service life.
Performance and technical parameters:
l Device number:12 cups 12 rods (isothermal refill cups can be added).
l Speed zone:(6+6) 2 working areas, 2 batches of dissolution test can be completed at the same time.
l Mode of administration:Simultaneous dosing and sequential dosing are two ways.
l The intelligent sampling frame can automatically rise and fall according to the volume of the solvent, and has functions such as real-time temperature monitoring in the cup.
l Applicable method:"Chines全自动溶出取样系统e Pharmacopoeia" first method (basket method), second method (paddle method), third method (small cup method), fourth method (paddle dish method), fifth method (rotating cylinder method).
l Mixing paddle and rotating basket specifications comply with pharmacopoeia regulations.
l Stirring paddle swing amplitude:≤0.3mm
l Stirring rate:25RPM-250RPM.( Mixing speed is optional up to 300RPM)
l Stirring direction:Clockwise, counterclockwise.
l Stirring rate resolution:0.01RPM.
l Speed error:≤0.5%.
l Swing of the basket:≤0.5mm
l Deviation between rotating rod and dissolving cup shaft:≤1mm
l Water bath temperature:Room temperature -45℃.(The heating temperature is optional up to 55℃)
l Temperature resolution:0.01℃.
l Temperature control accuracy of water bath:0.2℃.
l Temperature control accuracy of dissolving medium:0.2℃.
l Dosing mode:Simultaneous dosing.
l Lifting system:Bamboo square column lifting.
l Authority management:Three levels, seven users.
l Audit trail:128 items x366 days.
l Operating noise:<60db
l Environmental condition:Ambient temperature 5-37 ℃, relative humidity ≤80%.
l Safety performance:In line with national industry standards, with self-test and automatic protection functions.
l Power source:220V,50Hz
* Additional optional items need to be purchased separately.
SD12溶出取样器
技术参数:
l 取样通道:12。
l 取样次数:不限(每批次16次)手动更换样品盘。
l 取样精度:RSD<0.5%
l 取样间隔:1分钟至999小时59分钟。
l 单次取样量:1ml~15ml
l 取样一致性:通道间 RSD≤1%
l 取样重复性:RSD≤0.5%
l 试管收集量:15ml。
l 补液功能:等体积补液。
l 初滤体积:0ml~10ml。
l 在线过滤器:滤膜孔径 0.45μm、0.8μm鲁尔接头式过滤器。
l 通讯接口: RS232、RS485、网络。
l 权限管理:三等级、七用户。
l 审计追踪:128条×366天。
l 登录方式:用户名+密码、指纹。
l 打印:在线打印。
Technical parameter:
l Sampling channel:12
l Sampling frequency:There is no limit (16 times per batch) to manually change the sample tray.
l Sampling accuracy:RSD<0.5%
l Sampling interval:1 minute to 999 hours and 59 minutes.
l The amount of a single sample:1ml~15ml
l Sample consistency:RSD between channels ≤1%
l Sampling repeatability:RSD≤0.5%
l Test tube collection:15ml.
l Rehydration function:Equal volume rehydration.
l Initial filtration volume:0ml~10ml.
l In-line filter:Filter membrane aperture 0.45um, 0.8um Luer connector filter.
l Communication interface: RS232、RS485、network.
l Authority management:Three levels, seven users.
l Audit trail:128 items x366 days.
l Login mode:User name + password, fingerprint.
l Print:Online printing.
